Voor meer informatie over hoe Epson omgaat met uw persoonlijke gegevens, verwijzen we u naar onze Privacy Information Statement.
Vul hieronder uw gegevens in. Een deskundige van Epson zal dan contact met u opnemen:
If the printer does not attempt to print, or the print job is not fully completed then there may be a communication issue between your computer and the printer. A communication-related problem may be the cause of other printing issues such as poor print quality when prints are smeared or fuzzy. EPSON Status Monitor may not operate when a communication problem or conflict is present.
The possible causes of a communication-related issue and how to troubleshoot them are explained in this article.
This article applies to Epson printers connected to a computer via a Parallel or USB interface cable. Epson products with a FireWire interface cannot be used via FireWire as Vista does not fully support it. The driver will be successfully installed and configured when using the USB or Parallel interface. For more information, see article "FireWire support information for Windows Vista and Windows 7".
This article does not apply to RTD products or printers used via a wired, wireless, or shared network connection.
If you are experiencing a problem printing from your computer to your printer, the first thing to check is that the printer itself is working correctly. This will help to identify the issue. Follow the steps below.
If you have received an error message on the computer, please make an exact note of the message, and use the search/find box to search the online support articles for a solution first.
Control panel displaying red error lights:
Product with an LCD screen, displaying an error:
Stylus printer with an LCD panel, showing it's in the Setup mode:
Example of the RX700 control panel:
Make sure there is power to the printer and the printer control panel is not displaying any error lights or error messages. You will need to load plain A4 paper into the printer's paper sheet feeder.
As this process varies across printer models, please consult your printer's user guide for instructions or see the following article: How to perform a Printer Operation Check (Self Test)
Refer to the table below and follow the recommended action.
|Pass?||Other issue?||Possible cause||Recommended action|
|No||-||The check was not performed correctly or there is a fault with the printer.||Perform the check again. If it fails again, the printer may require a service. Contact Epson - no further troubleshooting is necessary at this point.|
|Yes||-||This confirms that the printer itself is fully working. The issue is related to either a breakdown in communication between the printer and the computer, the configuration of the Windows system, or the driver installation on the Windows computer.||Reconnect the printer to the computer and follow the next series of steps to troubleshoot the issue.|
|Yes||Printing is slow||Slow printing can be caused by settings in the printer driver, the size of the data being sent to the printer (e.g. a large file such as a photo), in addition to the spooling system. It is also possible that there is a physical problem with the printer.||See How to troubleshoot slow printing in Windows for assistance. Failing this, contact Epson for support.|
|Yes||Printing partial pages||This can be caused by settings in the printer driver, the size of the data being sent to the printer (e.g. a large file such as a photo), in addition to the spooling system.||See When I send a print job to my printer, partial pages are printed or there's incomplete text or image. What can I do? for assistance. Failing this, contact Epson for support.|
Connecting your product through another peripheral (e.g. a Scanner, Switch box, external USB hub) can cause problems. Even if these devices have been connected in the past with no problems, they must still be eliminated whilst troubleshooting. For products connected via a USB hub, this article may offer a solution.
Listed on the General tab is the amount of installed RAM, CPU type and speed, and the specific operating system version:
Your computer must be a Windows Vista pre-installed model, or a Windows 2000 or XP pre-installed model that was formatted and installed with Windows Vista. (Operating systems upgraded from Windows ME, 98, and 95 are not supported by the software.)
However, please be aware that Microsoft has documented issues with installing drivers on system upgraded from Windows XP as described in article "You receive an error message if you try to install a USB device on a Windows Vista-based computer that was upgraded from Windows XP".
These are described in some of the following Microsoft articles:
The latest updates can be downloaded and installed through the Windows Update or Microsoft Update tool, available from Microsoft website.
It is important that your computer meets the minimum system requirements as specified by Epson. These system requirements include the operating system version, installed RAM, free hard drive space, CPU type and CPU speed.
Example of a possible Status Monitor error message
If you have an All-In-One, ensure that none of the following are connected at the same time when setting-up or using your All-In-One as this may cause a conflict:
Incorrect or incomplete software installation can lead to USB problems. In Windows Vista, you should only connect the printer to the computer and power it on when the EPSON installation program prompts you to. It should not be connected and powered on before installing the software.
Make sure that your computer provides USB support. Follow the steps below:
Figure 1: The USB Host Controller is identified as 'Intel (R) ICH9 Family' with an individual ID (2934):
If Universal Serial Bus Controllers is not listed, your system cannot detect the USB controllers and there may be a hardware issue. In the event of this, contact your dealer for advice. No further troubleshooting is necessary at this point.
For detailed information about your computer, contact your dealer.
Device Manager confirms the system provides USB support, but this option was not listed as an available port setting in "Ports":
The device drivers for the USB Host Controllers may need to be updated. However, we recommend that you remove the entry for the Epson device from Device Manager and uninstall the printer software. This will allow you to start the installation again. Refer to the next section.
Check if Device Manager detects the printer and if there is an error with the device:
Look for the following headings:
If the heading branch is not already expanded [-], click the [+] to expand the heading and view the devices below it.
Look under Universal Serial Bus Controllers for USB Printing Support.
USB 2.0 Printer
USB 2.0 MFP
EPSON Scanner (All-In-Ones only)
EPSON printer name (e.g. EPSON Stylus DX7400)
Figure 1: USB2.0 Printer (Hi-speed) appears under Other Devices:
If USB 2.0 MFP appears, do not move to the next step; this error is displayed because your installation of Windows does not have a generic Windows system file already installed. The USB2.0 MFP (High Speed) device needs to be installed using a generic Windows driver file USBCCGP.sys. Please use the following procedure to first find the location of this file and then update the unit with this driver:
This should then install the USB Composite driver required by the unit and allow you to continue the installation of the other functions of the unit, such as the USB Printing Support and USB Mass Storage Device.
Once you have confirmed that these items appear, proceed to Step 6 in this section.
|If a question mark appears over an identified device, there is an error with the driver installation or the driver may need to be updated.||For an Epson device, you can update the driver; right-click on the entry and left-click on Update Driver. Should the entry not refer to the Epson product, contact your vendor for support.
This will open the Update Driver Wizard. Follow the on-screen prompts, allowing Windows to connect to Windows Updates for that time. If the wizard fails to update the driver and the erroneous entry is still listed, proceed to Step 7 in this section.
|If a black triangle is over a device icon, the device has been disabled.||Right-click on the device entry and left-click on Enable. If there are any other error symbols over the device icon, check the guidance in this section.|
|If an Exclamation Mark is over a device icon, there is an error with the driver or a suitable driver could not be found (and not installed).||Proceed to Step 7 in this section.
Should the entry not refer to the Epson product, contact your vendor for support - you will need to update or reinstall the device's driver.
If a red cross is over a device icon, the device has been disabled. Right-click on the device entry and left-click on Enable. Try to print again, if you are still unable to print please move to Step 17 to uninstall and reinstall the printer software.
It is possible to refresh the Parallel port, which is recommended if printouts have had garbled or strange characters, or the printer continuously feeds and ejects sheets of paper without attempting to print. To do this, right-click on the Printer Port (LPT1) then left-click on Uninstall.
Click OK to the Confirm Device Removal prompt. Click on Action at the top of the Device Manager window, then click on Scan for hardware changes. It should redetect the port and reinstall the driver.
This is important if you use the Print toolbar shortcut when printing from an application as this does not give you a choice of printer and sends the print job to the default printer.
Example of the Print toolbar shortcut:
If it is not set as the default (indicated by the tick above the icon), locate the printer icon for the printer that you want to be the default. Right-click on the icon then left-click on Set As Default. For detailed guidance, see Windows: Set the printer as default.
If there is more than one icon for your Epson printer, such as Epson Stylus DX4800 Series and Epson Stylus DX4800 Series (Copy 1), cancel the documents for all instances of the driver and restart the computer.
See Multiple copies of the Driver are listed in the Printers folder and return to this article if necessary.
An incorrect printer driver may be in use which can cause print jobs not to start, or for Status Monitor not to operate correctly. One of the following may have occurred, and thus the driver needs to be checked:
If your printer's model name ends with '50' or '05', the name in the folder will end with '00' instead. For example, if you had the Stylus DX6050 it will be listed here as the Stylus DX6000 Series. This applies to any A4 printer with a model name that ends with '50' or '05'. These products use the same driver and only standard model name is listed.
If the printer name is correct for your model move to Step 15.
Check the description and tables below to identify if the correct Vista driver is in use for your Epson product.
a) If your printer is listed amongst these models, the driver name should end with '(M)':
(e.g. The R300 should be listed as Epson Stylus Photo R300 (M), not Epson Stylus Photo R300 or Epson Stylus R300 Series.)
|Stylus Color Series||Stylus Color 880|
|Stylus Photo Series||Stylus Photo 1280, Stylus Photo 1290, Stylus Photo 1290s, Stylus Photo 780, Stylus Photo 785EPX, Stylus Photo 790, Stylus Photo 810, Stylus Photo 820, Stylus Photo 825, Stylus Photo 830, Stylus Photo 830U, Stylus Photo 890, Stylus Photo 895, Stylus Photo 900, Stylus Photo 915, Stylus Photo 925, Stylus Photo 935|
|Stylus C Series||Stylus C20 Series, Stylus C40 Series, Stylus C41 Series, Stylus C42 Series, Stylus C43 Series, Stylus C44 Series, Stylus C45 Series, Stylus C46 Series, Stylus C50 Series, Stylus C60 Series, Stylus C61 Series, Stylus C62 Series, Stylus C63 Series, Stylus C64 Series, Stylus C66 Series, Stylus C65 Series, Stylus C67 Series, Stylus C68 Series, Stylus C70 Series, Stylus C80 Series, Stylus C82 Series, Stylus C83 Series, Stylus C84 Series, Stylus C85 Series, Stylus C86 Series, Stylus C87 Series, Stylus C88, Stylus C88+
Stylus C48 (Windows Update)
|Stylus D Series||Stylus D68, Stylus D88, Stylus D88+|
|PictureMate Series||Picturemate, Picturemate 500|
|Stylus Photo R Series||Stylus Photo R200, Stylus Photo R210, Stylus Photo R300, Stylus Photo R310, Stylus Photo R320|
|AcuLaser Series||AcuLaser C1000, AcuLaser C1100, AcuLaser C1900, AcuLaser C2000, AcuLaser C2600, AcuLaser C3000, AcuLaser C4000, AcuLaser C4100, AcuLaser C4200, AcuLaser C8500, AcuLaser C8600, AcuLaser C9100, AcuLaser C900, AcuLaser 2600|
|EPL Series||EPL-5700, EPL-5800, EPL-5900, EPL-6100, EPL-6100L, EPL-6200, EPL-6200L, EPL-C8200, EPL-N2000, EPL-N2050, EPL-N2050+, EPL-N2700, EPL-N2750, EPL-N3000, EPL-N4000, EPL-N4000+, EPL-N7000|
|Stylus CX Series||Stylus CX3200, Stylus CX3600, Stylus CX3650, Stylus CX5200, Stylus CX5400, Stylus CX6400, Stylus CX6600||Available via Windows Update|
|Stylus Photo RX Series||Stylus Photo RX420, Stylus Photo RX425, Stylus Photo RX500 (RX510 Russia), Stylus Photo RX600 (RX610 Russia), Stylus Photo RX620||Available via Windows Update|
b) If your printer is listed amongst the following Vista-supported models released before June 1st 2007, the original driver CD-ROM does not contain Vista drivers but a suitable Vista driver can be downloaded from the Epson website:
|Stylus D Series||Stylus D78, Stylus D92 (Russia: Stylus C91)|
|Stylus Photo Series||Stylus Photo 1400 (Russia: Stylus Photo 1410), Stylus Photo 2100 (Vista 32-bit only), Stylus Photo 950 (Vista 32-bit only)|
|PictureMate Series||PictureMate 100, PictureMate 240, PictureMate 280|
|Stylus Photo R Series||Stylus Photo R1800, Stylus Photo R220, Stylus Photo R240, Stylus Photo R2400, Stylus Photo R245, Stylus Photo R265 (Russia: Stylus Photo R270), Stylus Photo R340, Stylus Photo R360 (Russia: Stylus Photo R390), Stylus Photo R800|
|AcuLaser Series||C3800N, CX11N|
|Stylus DX Series||Stylus DX3800 (Russia: Stylus CX3700), Stylus DX3850, Stylus DX4000 (Russia: Stylus CX3900), Stylus DX4050 Stylus DX4200 (Russia: Stylus CX4100), Stylus DX4250, Stylus DX4800 (Russia: Stylus CX4700), Stylus DX4850 Stylus DX5000 (Russia: Stylus CX4900), Stylus DX5050, Stylus DX6000 (Russia: Stylus CX5900), Stylus DX6050 Stylus DX7000F (Russia Stylus CX6900F)|
|Stylus Photo RX Series||Stylus RX520, Stylus RX560 (Russia: Stylus Photo RX590), Stylus RX640, Stylus RX700|
c) If your printer is listed amongst the following models, the correct Vista driver should end with 'ESC/P2':
For example, the Stylus Photo 1270 should be listed Epson Stylus Photo 1270 ESC/P2. If listed, without 'ESC/P2' this driver is not suitable for Vista.
|Stylus Photo Series||Stylus Photo 1200, Stylus Photo 1270, Stylus Photo 2000P, Stylus Photo 700, Stylus Photo 720, Stylus Photo 750, Stylus Photo 790, Stylus Photo 870, Stylus Photo EX, Stylus Photo EX3|
Dot Matrix Printers:
|DFX Series||DFX-5000, DFX-5000+, DFX-8000, DFX-8500|
|DLQ Series||DLQ-3000, DLQ-3000+, DLQ-3500|
|FX Series||FX-1170, FX-1180, FX-1180+, FX-2170, FX-2180, FX-2190, FX-880, FX-880+, FX-890, FX-980|
|LQ Series||LQ-1150, LQ-2070, LQ-2080, LQ-2090, LQ-300, LQ-300+, LQ-570+, LQ-570e, LQ-580, LQ-590, LQ-630, LQ-670, LQ-680, LQ-680 pro, LQ-870|
|LX Series||LX-1170, LX-300, LX-300+|
For example, if your printer is the Stylus Photo R240 but the printer icon is named 'Epson Stylus Photo R250', whilst the printers are almost identical but used in different regions, the driver may not work as it is named for another printer and may cause issues with the operation of Status Monitor and reporting ink cartridge information.
Figure 1: Example of the R250 driver being installed. For R240 users, the R240 icon would need to be present in order to print:
The wrong printer model was selected when you installed the printer driver as there was a choice of more than one model.
Figure 2: Example of the Epson Printer Utility Setup giving a choice of more than one printer model at the start of the installation. The R250 is a non-European model, so the R240 should be selected:
Figure 3: In this example the EPSON Printer Utility Setup gives a choice of two models and the DX5000 has been highlighted.
If you had a DX6000, you should click on to highlight 'EPSON Stylus DX6000 Series' then click OK:
Whilst the printers are almost identical but used in different regions, the driver may not work as it is named for another printer. Uninstall and reinstall the driver, reinstalling either from the CD-ROM or from the Epson website. Proceed to Step 17, or for detailed guidance.
Spool print documents so program finishes printing faster
> Start printing immediately
Print spooled documents first
Enable advanced printing features
The next stage in troubleshooting would be to disable the background programs that run in Windows. These can conflict with the printer software operation. This can cause the following symptoms:
If you are experiencing any of these problems, disable the Startup Items in the System Configuration Utility (MSconfig). Click here for a full guide.
If printing is not possible, the problem is not related to a conflict with a Startup Item or process. Follow the instructions in the guide to re-enable the Startup Items the move to the next step in this troubleshooting.
Slow printing can be caused by settings in the printer driver, the size of the data being sent to the printer (i.e. a large file such as a photo), in addition to the spooling system.
If the problem is still present, follow this article from the start to ensure that all possible causes have been addressed.
If you have the original Epson Software CD-ROM that came with your Epson printer, check the CD-ROM for any operating systems stated on it.
Only use the CD-ROM to install your Epson product if that product was released after Windows Vista. If in doubt, check the Epson website for a driver and download it if available. Click here for help.
Only power on the printer when prompted to by the installation program. Follow the on-screen prompts to complete the installation.
Only power on the printer and connect the USB cable from the printer to the USB port on the computer when prompted to by the installation program. Follow the on-screen prompts to complete the installation.
Is aan uw winkelwagentje toegevoegd